Watch our ISTE Webinar!Watch our Latest ISTE Webinar! Click here



3Doodler EDU Events: SXSWedu 2016

Earlier this month, we brought the 3Doodler EDU Bundle and the new 3Doodler Start to Austin, Texas for four days of live Doodling and education brainstorms at SXSWedu. [...]

By |March 30th, 2016|Blog, Education|

Introducing 5 inventive challenges integrating 3Doodler & LEGO

We first came across LEGO Education at SXSWedu in March 2015. Inspired by the huge impact they are making in education, we challenged our EDU team to see what would happen when we combined the world's first 3D printing pen with the world's favourite building blocks. We wanted to use LEGO to quickly construct larger [...]

By |November 6th, 2015|Blog, Education|

Announcing the First 3Doodler Awards

When we invented the 3Doodler we imagined all kinds of uses for it. Truth be told though, what we imagined became irrelevant within hours of launching. From useful day to day applications (DIY, model making) to the sublime and super niche (contact lenses!?, decorating pipework), you flooded us with your ideas. That momentum has never [...]

By |October 28th, 2015|Blog|

The Official 3Doodler Star Wars BB-8 Non-Review

Our friends at Firebox and LOG-ON were gracious enough to lend us the Tickle-Me-Elmo of 2015 consumer tech to review: The BB-8. Here's what happened.

By |October 2nd, 2015|Blog|

Introducing the 3Doodler Kaleidoscope Outfit

Most 3D printed concept dresses look fantastic but are not very practical. We set out to change that.

By |September 15th, 2015|Blog|

Fashion X School: Personalized Badges and Stickers

There are always mixed emotions when heading back to school; excited to buy new school supplies, yet sad because summer is over and we're back to books and studying. There is also the excitement of getting the latest fashionable school stuff, like bags, pencil cases, purses, wallets, and then personalizing them with other materials to make them look [...]

By |September 14th, 2015|Blog|

3Doodler Community Retrospective: Doodled Fashion in 2015

It has been an exciting year for 3Doodler, with creativity in areas we never would have imagined.

By |September 7th, 2015|Blog|

3Doodling Barbie Outfits: Life In Plastic, It's Fantastic!

Barbie and Ken waiting for their photoshoot "My dad used to travel a lot when I was younger, and as souvenirs he would bring me Barbie dolls from all over the world." All of them looked exactly the same, save for the differences in clothing. It was frustrating because I was never content with [...]

By |September 1st, 2015|Blog|

How to: Create joints with the 3Doodler

Drawing to Doodling I like to draw.  A lot.  Growing up, I would fill sketchbooks with all sorts of characters.  Oftentimes my favorite cartoon or comic book characters were the focus of my drawings, oftentimes it was characters that I designed myself. When I first got my 3Doodler, I was determined to [...]

By |June 22nd, 2015|Blog|

3Doodler Plastics Head-To-Head!

One of the most frequent questions we get is what is the difference between the different 3Doodler plastics. With the launch of our brand new FLEXY plastic and over 15 new additions to our PLA range, we’re happy to share our epic “Complete Guide to Plastics for your 3Doodler”. This new infographic pitches ABS, PLA [...]

By |May 17th, 2015|Blog, Plastic, Tips and Tricks|

50 Shades of PLA

Our plastic gets us really hot under the collar. So hot we’re thinking about making a movie about it. But before we do, we decided to get a little steamy in the kitchen... with the 3Doodler... on the floor… on the work-surfaces… all of them... in fact anywhere we could find to Doodle. Even on [...]

By |May 4th, 2015|Blog, Plastic, Stencil|

3Doodler Guide for PowerDoodlers (Part 2 of 2)

Hot off the heels of Part 1 last week, here is the second in the PowerDoodler tips and tricks series! Thanks for all your feedback. Some of your knowhow has made it into this piece. 1. "Tie Dye"/colour gradients Simply cut up two different coloured plastic strands into 1 cm pieces and then alternate the [...]

By |October 9th, 2014|Blog, Tips and Tricks|

3Doodler 3D printing pen exclusive to Maplin in UK

Maplin is to exclusively sell the 3Doodler in the UK.

By |April 10th, 2014|Blog|

First month of 3Doodling

“The 3Doodler lives up to my expectations and more! It opens up a lot more fun options and I would have loved to have 3-4 of them to use them for workshops… " – Kickstarter backer The past eight months have been a crazy time for the 3Doodler team, from launching the 3Doodler on Kickstarter [...]

By |November 4th, 2013|Blog, Updates|

Etsy Artist Update: Ruth

A few weeks before our Kickstarter launched we were brainstorming how to show backers the artistic potential of 3Doodler. It occurred to us that wire art was a very close parallel, at least in look and feel, to 3Doodling. So we scoured the web and came across some truly talented wire artists on Etsy. After [...]

By |October 23rd, 2013|Artists, Blog|

Shipping & New Site

We are pleased to announce that 2,000 3Doodlers will be shipping tomorrow (18th October), right on schedule. The next 3,000 will be shipping before the month is up. November pens are scheduled to ship within the first half of November, and we will provide updates for December, January and February backers soon. Please do not [...]

By |October 17th, 2013|Blog|

3Doodler is shipping!

We're thrilled to announce that we shipped the first 100 3Doodlers today! The team was out in force making sure the pens were packed and that your boxes were loaded with stunning 3Doodler plastic. We've attached a few photos from the packing floor to give you a sense of what's going on and what you can [...]

By |September 30th, 2013|Blog|

Feature Update!

We've been hinting for a while that there will be some secret feature additions to your 3Doodlers. We're now thrilled to announce what we hope will be the first of many enhancements to the world's first 3D printing pen! 1. A protective silicone tip cover which will protect your fingers from most of the heated extruder, addressing [...]

By |September 26th, 2013|Blog|

Bonus Packs for All!

Thank you all for your feedback! Firstly, the Hall of Fame is back up, apologies for the downtime. We should be able to handle the traffic now! But on to the plastic... There was strong demand for Glow in the Dark plastic, as well as a lot of requests for Fluorescents (and from our PLA backers, translucent plastics). For anyone clamouring for conductive plastics, we haven't yet tested these with the 3Doodler, but please note the comments about conductive paint, which can be used as a good work-around. So what's it gonna be? [...]

By |June 19th, 2013|Blog|

3Doodler Hall of Fame!

We're thrilled to announce the unveiling of our 3Doodler/Kickstarter Hall of Fame. We can’t begin to express how grateful we are for your support! It’s because of you, our Kickstarter backers and fans, that we were able to bring the 3Doodler to life. You had the vision to see what 3Doodler could be, and in turn closed the gap between imagination and reality. [...]

By |June 13th, 2013|Blog|

Shopping cart

Shipping and discount codes are added at checkout.